Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fibreglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allowing the subwoofer to fit perfectly to the box, decoupling it from vibration.
The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2-ohm impedance and S8-4 with 4-ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W RMS to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite while maintaining the depth of installation unaltered.
Midrange size mm (in.): 100 (4) Tweeter diaphragm mm (in.): 24 (0.9) Power Handling: 80W peak 40W continuous Impedance: 4 ohms Frequency Response Hz: 100 - 22k Magnet size D x d x h mm(in.): 50 (1.97) x 29 (1.14) x 3 (0.12)
Weight of one speaker kg (lb.): 0.5 (1.1) Woofer Voice Coil Ø mm (in.): 25 (1) Tweeter Voice Coil Ø mm (in.): 20 (0.8)